Home
Up
Products
Contents
News
Co. Profile
Contact Us                    

ACD15 CONTAINER DOLLY

 

UNLADEN WEIGHT.
630 kgs.

CARRYING CAPACITY.
1600 kgs at 24 kph.

ULD CAPABILITY.
1 x LD3
1 x LD2
1 x LD1
1 x LD3-46W (AKH)

LOAD BED.
360 degree rotating platform with auto-locking at every 90 degrees, Lock is released by foot-pedal from either side.
Two rows of rollers with a central walkway.Continuous guide-rails at each side with tapered lead at each end also incorporate the vertical restraint for the containers.
Container end-stops at each end of the platform are ‘roll-over’ stops, depressed by the container and automatically raising behind the container, they are lowered by manually-operated levers at opposite ends of the rotating platform.
The intermediate end-stop for LD2 containers is separately (manually) operated.

RUNNING GEAR.
The Four Wheels are, 15 x 4 ½ -8 x 3.00D 3-stage Super Elastic solid rubber tyres, on 5mm x two-piece bolted wheel rims. Owen Holland’s unique flange mounted, five stud, taper roller bearing hub system (separately detachable axle-ends) is used.

STEERING.
Ackerman type on front wheels, activated by the tow-bar pintle and steering track-rods. All linkages are enclosed within the lower chassis.

 

BRAKES.
Brakes for parking act on the rear wheels and are operated by raising the tow bar to an automatically latched position and released by a foot-pedal mounted on the tow bar.

STANDARD COUPLINGS.
The Tow Bar
- is fitted with a grip-handle. The forged steel eye has a 50 mm diameter hole and a ring section diameter of 30 mm. The tow bar cannot contact the ground when allowed to fall.
The Rear Hitch - is a forged steel safety hook with automatic sprung latch.

STANDARD FINISH / FEATURE
Hot Dipped Galvanized to ISO1461.
High-Visibility markings on surround-frame corners and both sides of towbar.

The Dolly is stackable (up to 4-high), via locations in-built on the chassis-frame.

OPTIONS-EXTRAS.

  1. Four wheel steering.
  2. Fork-lift pockets.
  3. Painted Finish to Client’s requirements.
  4. Alternative couplings.
  5. Special identification or corporate markings.
  6. Additional visibility marking

NOTES.
Specifications to suit clients particular applications can often be offered.

 

Owen Holland [Engineering] Ltd. Holland Way. Blandford Forum. Dorset. DT11 7TA - UK.
Phone: +44 (0) 1258 452461      Fax: +44 (0) 1258 480169   E-mail sales@owenholland.com

 

Home ] Up ] [Contents] [Products] [News]